Page 2 of 2
Re: VES-145 wiring help
Posted: Mon Oct 17, 2016 5:36 pm
by Ben
Sounds good. Thanks for the help and suggestion. Do you have a wire diagram for that you any chance?
Re: VES-145 wiring help
Posted: Fri Feb 24, 2017 11:34 pm
by Ben
Hi Stormsetter4 I have aqquierd that Relay that you linked me, I am also looking at that diagram you sent me on a previous post of mine. I would guess Terminals A1 and A2 on the bottom are input and ontop A1 and A2 are outputs unless I need to put them on one of the top grey ones.
Re: VES-145 wiring help
Posted: Sat Feb 25, 2017 9:57 pm
by Stormsetter4
If you can, post a photo of the relay with a couple of different angles, that way we can figure out which terminals are the coil.
Re: VES-145 wiring help
Posted: Tue Mar 07, 2017 6:14 pm
by Ben
Sorry for the long delay here are the pictures
http://imgur.com/a/u0x4G
Re: VES-145 wiring help
Posted: Wed Mar 08, 2017 1:12 am
by Wdr
The coil is terminals a1, and a2. Hook the output of the timer to those two. Incoming power for the siren goes on L1, And L3. Siren gets hooked to T1 and T3.
Re: VES-145 wiring help
Posted: Wed Mar 08, 2017 1:50 am
by Ben
Thank you so much.