Page 1 of 1
Federal sign and signal model 28 tear down
Posted: Sat Oct 01, 2016 3:50 pm
by vw_man72
Hello all! I just picked up a model 28. It is pretty weak and in need of sprucing up! So I am going to take it apart and clean/paint it and replace anything that I can that it needs. I have never been in one so, is there a good breakdown and rebuild article out there? Also is there a specific way I should wire it? Like does it need a solenoid or just wire straight to battery with a switch in between? Thanks a lot!
Re: Federal sign and signal model 28 tear down
Posted: Sun Oct 02, 2016 5:58 am
by Daniel
I had one of those, and you'll definitely need a high current relay or solenoid to switch it.
Re: Federal sign and signal model 28 tear down
Posted: Sat Oct 15, 2016 4:07 am
by FS Rotor
Sending it to B&M is a good idea.
Re: Federal sign and signal model 28 tear down
Posted: Sun Feb 26, 2017 1:42 am
by HalliganHook
FS Rotor wrote: ↑Sat Oct 15, 2016 4:07 am
Sending it to B&M is a good idea.
B&M will refurbish Federal Model 28 sirens?
Re: Federal sign and signal model 28 tear down
Posted: Wed May 24, 2017 1:25 am
by FS Rotor
Yes! They do any siren, but as of now the owner is dealing with cancer so it could take weeks.