User avatar
Archon
Registered User
Registered User
Posts: 1867
Joined: Mon May 15, 2006 12:37 pm
Real Name: Joe

Thu Jul 26, 2007 7:20 am

I want to hear what a 5/6 would sound like in a Model 2

Robert Gift
Registered User
Registered User
Posts: 2857
Joined: Sat Jun 03, 2006 2:22 am
Location: Denver, CO

Thu Jul 26, 2007 12:07 pm

A fascinationg effect about dual tone sirens is that when they reach their peak steady pitch, to me the two tones blend so well they become inaudible as two distinct tones.

In the Thunderbolt, and SD-10, I hear the sour gravely resultant and not the two tones producing it.

But when those tones rise and fall, I can discern the two tones.

User avatar
Gil
Registered User
Registered User
Posts: 1920
Joined: Mon May 15, 2006 11:55 am
Real Name: Gil R
YouTube Username: gilramirez12
Location: IL
Contact: Website YouTube

Thu Jul 26, 2007 12:38 pm

I was never able to hear the dual=toned in sirens. I dont know why, i just cant hear it.

However, ive figured out that dual-toned sirens often "switch tones" in opperation. where you can hear one, then the other.

Robert Gift
Registered User
Registered User
Posts: 2857
Joined: Sat Jun 03, 2006 2:22 am
Location: Denver, CO

Thu Jul 26, 2007 2:24 pm

The most fascinating siren sound I ever heard (here) was a 2t22 in Hi-Lo as the pitch rose.
It was haunting!
As I lock on to one pitch, as it raises, the pitch then drops down to the other pitch which is also rising. Difficult for my mind to grasp.

The nature of dual-toned sirens is that their tones blend so well it is difficult to differentiate them.
Had I not heard the tones rise or fall but only heard them at their steady peak, I would not have recognized that they were dual-tone.

A poor analogy is that when you see YELLOW on this screen, you are actually seeing RED and GREEN blending to produce YELLOW.
No YELLOW phosphor exists on the screen.

The pipe organ has stops which have pitches which blend together so well that you don't perceive them as separate tones.

User avatar
fstbolt
Registered User
Registered User
Posts: 58
Joined: Wed Apr 25, 2007 9:06 pm
Location: Oakland County,Michigan
Contact: Website

Fri Aug 10, 2007 12:14 am

5/6 because the tone produced is a lot more attention getting. :wink:
visit: http://fstbolt.proboards59.com/ today!
don't forget to register.

User avatar
500AT
Registered User
Registered User
Posts: 1236
Joined: Mon Dec 18, 2006 10:21 pm
Real Name: Ron
Location: Ann Arbor, Michigan
Contact: Website

Fri Aug 10, 2007 5:10 am

5/6 all the way! :D

Sincerely yours,

Ron W.

"When your siren's a failin', chances are it's a Whelen."

Robert Gift
Registered User
Registered User
Posts: 2857
Joined: Sat Jun 03, 2006 2:22 am
Location: Denver, CO

Fri Aug 10, 2007 11:54 am

Cooner750 wrote:I would prefer the 4/5, because not only does a lower pitch sound penetrate better, it also sounds better. I don't really care for high pitched sirens.
If the 5/6 sounds a D and F (minor third), at the same rotor speed the 4/5 would sound B-flat and D (major third) a major third lower than the 5/6.
Anyone know the 7(?) adjustable chopper speeds? Or is it 5?
I would prefer the 5/6 at a lower chopper speed.

User avatar
SirenMadness
Registered User
Registered User
Posts: 3749
Joined: Mon May 15, 2006 2:47 pm
Location: Windsor, Ontario
Contact: Website

Fri Aug 10, 2007 2:26 pm

I prefer the five-to-four port-ratio on a Thunderbolt, because it sounds simply monstrous, like a Hurricane.
~ Peter Radanovic

Return to “Main Outdoor Warning Sirens Board”

Who is online

Users browsing this forum: No registered users and 69 guests