User avatar
Ben
 
Posts: 12
Joined: Sun Jun 26, 2016 12:10 am

Re: VES-145 wiring help

Mon Oct 17, 2016 5:36 pm

Sounds good. Thanks for the help and suggestion. Do you have a wire diagram for that you any chance?

User avatar
Ben
 
Posts: 12
Joined: Sun Jun 26, 2016 12:10 am

Re: VES-145 wiring help

Fri Feb 24, 2017 11:34 pm

Hi Stormsetter4 I have aqquierd that Relay that you linked me, I am also looking at that diagram you sent me on a previous post of mine. I would guess Terminals A1 and A2 on the bottom are input and ontop A1 and A2 are outputs unless I need to put them on one of the top grey ones.

User avatar
Stormsetter4
Registered User
Registered User
Posts: 1128
Joined: Wed Dec 28, 2011 1:23 am
Real Name: Cruz
YouTube Username: Stormsetter4
Location: Kimberling City, MO
Contact: Website

Re: VES-145 wiring help

Sat Feb 25, 2017 9:57 pm

If you can, post a photo of the relay with a couple of different angles, that way we can figure out which terminals are the coil.
-Cruz Newberry
Table Rock Alerting Systems, LLC
Emergency Alerting Systems for Communities & Industry


Website


Youtube Channel

User avatar
Ben
 
Posts: 12
Joined: Sun Jun 26, 2016 12:10 am

Re: VES-145 wiring help

Tue Mar 07, 2017 6:14 pm

Sorry for the long delay here are the pictures
http://imgur.com/a/u0x4G

Wdr
Registered User
Registered User
Posts: 58
Joined: Wed Nov 27, 2013 10:17 pm

Re: VES-145 wiring help

Wed Mar 08, 2017 1:12 am

The coil is terminals a1, and a2. Hook the output of the timer to those two. Incoming power for the siren goes on L1, And L3. Siren gets hooked to T1 and T3.

User avatar
Ben
 
Posts: 12
Joined: Sun Jun 26, 2016 12:10 am

Re: VES-145 wiring help

Wed Mar 08, 2017 1:50 am

Thank you so much.

Return to “Main Outdoor Warning Sirens Board”

Who is online

Users browsing this forum: Ahrefs [Bot], xFoxyDaPirate and 38 guests