![Image](https://lh4.googleusercontent.com/-taeR4unQbzM/VOjohJg9DfI/AAAAAAAALXg/ZuFwknFRiJk/w433-h577-no/20150221_095223.jpg)
The 1/2" fitting is the size needed (on the left).
![Image](https://lh6.googleusercontent.com/-4KGRbwGT3Kg/VOjohMt7Q5I/AAAAAAAALXg/NEJ93unWqA0/w433-h577-no/20150221_095229.jpg)
Here is what it looks like once installed.
![Image](https://lh6.googleusercontent.com/-8i6sQNqovrY/VOjohPIX4QI/AAAAAAAALXg/oWVuewRL6fo/w433-h577-no/20150221_132454.jpg)
You don't just need bearings. You need the whole rest of the siren from what I saw on the auction pageValtonus wrote:Anyone able to find bearings compatible with a STH 10.. because I will be getting a chopper and a stator for a STH 10.. but nothing more then that.. So I can't do drill runs.. so I would need bearings.. I plan on dropping around 30 on it in the future.. if not a BIT more.. -More details on the siren in a different post later on-.
If you are talking about this siren:Valtonus wrote:Anyone able to find bearings compatible with a STH 10.. because I will be getting a chopper and a stator for a STH 10.. but nothing more then that.. So I can't do drill runs.. so I would need bearings.. I plan on dropping around 30 on it in the future.. if not a BIT more.. -More details on the siren in a different post later on-.
stormsetter4 wrote:If you are talking about this siren:Valtonus wrote:Anyone able to find bearings compatible with a STH 10.. because I will be getting a chopper and a stator for a STH 10.. but nothing more then that.. So I can't do drill runs.. so I would need bearings.. I plan on dropping around 30 on it in the future.. if not a BIT more.. -More details on the siren in a different post later on-.
http://m.ebay.com/itm/391342492127?_mwBanner=1
You are gonna need a 10 HP motor for this to mount to, the chopper rides on the shaft and bearings of the motor. You can't just buy bearings and have a siren. Also, i assume you are talking about spending $30 on this, you are going to need a lot more than that to get it to run.
Well then go to your nearest scrapyard and get you a cheap junk motor. They probably wont let one go for 30$ though.Valtonus wrote:stormsetter4 wrote:If you are talking about this siren:Valtonus wrote:Anyone able to find bearings compatible with a STH 10.. because I will be getting a chopper and a stator for a STH 10.. but nothing more then that.. So I can't do drill runs.. so I would need bearings.. I plan on dropping around 30 on it in the future.. if not a BIT more.. -More details on the siren in a different post later on-.
http://m.ebay.com/itm/391342492127?_mwBanner=1
You are gonna need a 10 HP motor for this to mount to, the chopper rides on the shaft and bearings of the motor. You can't just buy bearings and have a siren. Also, i assume you are talking about spending $30 on this, you are going to need a lot more than that to get it to run.
Oh, I am referring to that.. but I saw it on Craigslist... Anyway, I don't need a working motorI just need something to make Drill runs possible.
I don't think it would even BEGIN to fit on a STH 10 chopper/stator..?connerdstines wrote:Well then go to your nearest scrapyard and get you a cheap junk motor. They probably wont let one go for 30$ though.Valtonus wrote:stormsetter4 wrote: If you are talking about this siren:
http://m.ebay.com/itm/391342492127?_mwBanner=1
You are gonna need a 10 HP motor for this to mount to, the chopper rides on the shaft and bearings of the motor. You can't just buy bearings and have a siren. Also, i assume you are talking about spending $30 on this, you are going to need a lot more than that to get it to run.
Oh, I am referring to that.. but I saw it on Craigslist... Anyway, I don't need a working motorI just need something to make Drill runs possible.
There is nothing special about the way those motors attach to the rotor and stator. Just find you a junk 7.5 or 10 horse motor with the same face/shaft diameter as the original(i'm sure you could find this info on the Board), put the thing together and run it up with a drill like you said you would.Valtonus wrote:I don't think it would even BEGIN to fit on a STH 10 chopper/stator..?connerdstines wrote:Well then go to your nearest scrapyard and get you a cheap junk motor. They probably wont let one go for 30$ though.Valtonus wrote:
Oh, I am referring to that.. but I saw it on Craigslist... Anyway, I don't need a working motorI just need something to make Drill runs possible.
Return to “Main Outdoor Warning Sirens Board”
Users browsing this forum: No registered users and 125 guests